Skip to product information
12.8V 100AH Ecco Lithium Battery 1.28kWh

12.8V 100AH Ecco Lithium Battery 1.28kWh

R 3,200.00

12.8V 100Ah / 1.28kWh Ecco Lithium Battery

Key Features:

  • Extended Cycle Life: Up to 20× longer cycle life and 5× longer float/calendar life compared to traditional lead-acid batteries, reducing replacement costs and lowering total cost of ownership.

  • Lightweight Design: Weighs only ~40% of a comparable lead-acid battery. Ideal as a direct “drop-in” replacement.

  • High Power Output: Provides up to twice the power of a lead-acid battery, even under high discharge rates, while maintaining full energy capacity.

  • Enhanced Safety: Lithium iron phosphate (LiFePO₄) chemistry eliminates explosion or combustion risks from high impact, overcharging, or short circuits.

  • Scalable Configuration: Supports parallel connection of up to 4 units or series connection of up to 4 units.

Specifications:

  • Nominal Voltage: 12.8V

  • Nominal Capacity: 100Ah

  • Nominal Energy: 1,280Wh

  • Combination Method: 4S

  • Cycle Life: 5,000 cycles @ 50% DOD @ 25°C

  • Self-Discharge: Minimal

  • Charge Efficiency: 97%

  • Standard Discharge Cut-off Voltage: 10.8V

  • Recommended Charging Voltage: 14.2V

  • Recommended Charging Current: 50A

  • Recommended Discharging Current: 100–150A

  • Weight: 12kg

  • Dimensions (L×W×H): 330 × 172 × 220 mm

  • Ingress Protection: IP65

Storage Guidelines:

  • Maintain ~50% charge if the battery will remain idle.

  • For long-term storage, recharge every 3 months to ~50% capacity.

  • Store in dry, ventilated areas away from corrosive materials, fire, or heat sources.

  • Operating temperature: -20°C to 55°C, relative humidity: 5%–85%.

Warranty:

  • 3-year manufacturer warranty.

  • Installation must be performed by a qualified electrical wireman or Master electrician with valid Department of Labour registration.

  • A certificate of compliance (COC) specific to the backup or solar system installation is required.

  • Installation must comply with SANS 10142 standards.

  • Warranty claims submitted without installation photos, a valid COC, or proof of qualified installation may be rejected.

You may also like